✔ Female pin connector wire cable plug socket display screen connector	✔ Female Wire Plug Robust Connection matrix display screen	✔ Female Connector Plug Set Easy Female Butting Connector

A device interface, in terms of position, is a path fixed on the boundary shell that connects the inside of the device with the outside. It is because of the existence of these interfaces that the device can power operation, output current, voltage, signal, information imaging and other media. The device relies on these interfaces to interact with the outside world.

             
                                                                   Picture-2-12Pin female cable connector for your option

You‘ll find these interfaces in almost any device assembly process. Even some energy storage devices with built-in batteries have at least one port, allowing the device to transfer energy through the docking port,not to mention other media interactions.

This involves a special kind of connector- interface connector or outlet connector. One end of this type connectors, which may be male or female, is fixed to the casing of the product. The other end is directly connected to the upper end of the installed product equipment when the product needs to be used.



1.As a female connector, it can be combined with the corresponding male connector to form a male/female docking connector, and can be combined with flange plate and partition plate to form a panel connector. Triple adaptation combination, the application form is very rich.
              
                                         Picture-Flange panel fixed connector,bulkhead panel fixed connector, male female butting connector
2.With a very high withstanding voltage point -2500V, you don‘t have to worry about the connector under normal application will be broken down.

3.Female connector flame retardant rating up to UL94 V-0. It should be explained here that UL94 is the most widely used flammability evaluation standard for plastic materials. This standard is used to evaluate the ability of a material to extinguish after being ignited. The flame resistance levels gradually increase from HB, V-2, V-1 to V-0. This also means that the UL94 V-0 female&connector has superior flame retardant performance with very high safety. Of course, the best materials are incombustible materials, but thermoplastic materials are rarely non-combustible. And the cost of incombustible material is relatively expensive.There are also very few practical applications that require such high-grade materials unless it‘s a special need. So we adopt PBT material, which is with high flame retardant grade and reasonable cost performance.

4. Connector, when used to connect signal cables,it is a signal connector. Control integration center control connected devices through signal wires and connectors. At the same time, the operating state of the equipment and the detected signal can also be fed back to the control center through the female socket along the connecting line. it also act as a power connector when it is connected to power cable.

5.Angular shell molding parts can help users quickly install and avoid imperfect tighten and shell slippage in the help of the “angular shell”, a new different design from general round non-thread injection parts. The housing is made of high-performance PBT material, which has extraordinary performance in strength, impact resistance, heat resistance, hardness and aging resistance.

         
              
                                                                                             Picture- female connector make up

2Pin Female Connector Cable Connector Outline Drawing